à¤Ã×èͧÁ×ÍÇÑ´ Moisture Meter à¤Ã×èͧÇÑ´¤ÇÒÁª×é¹ >DM4A à¤Ã×èͧÇÑ´¤ÇÒÁª×鹡ÃдÒÉ äÁé ¤Í¹¡ÃÕµ Universal Moisture Meter Type DM4A for Wood & Construction Materials, Paper & Cardboard and Others Universal Moisture Meter Type DM4A for Wood & Construction Materials, Paper & Cardboard and Others digital hand held instrument with capacitive measuring principle technical datas: measuring range 0,0 - 99,9 % H2O (adjustable) resolution: 0,1% dimension: approx. 180 x 80 x 35 mm weight: approx. 0,25 kg non-destructive measurements - done in seconds- just press it on the material and read off the average moisture content till a depth of approx. 3 cm material group setting by means of a membrane-type keypad the adjusted material group can always be seen in the display microprocessor controlled measring with automatic zero point correction up to 10 customer specific linearisation curves with 8 points each possible storage for 100 moisture values automatic calculation of maximum, average and minimum valueMoisture meter à¤Ã×èͧÇÑ´¤ÇÒÁª×é¹ the instrument works with a standard 9V blockbatterv, we strongly recommend the lithium battery type U9VL with at least 30 hours using time and at least 10 years lifetime without using for testing and calibrating we recommend our test modules PE05 & PE30 Optional: software DMI-Controller inc. RS232 interface cable for PC calibration in connection with the test modules PE05 and PE30 changing of customer specific calibration curves, the curves can be stored on the hard disc changing of measuring parameters measurements can be transfered permanently to the PC, the values will be displayed graphicaly and can be stored on the hard disc stored values in the instrument can be transfered to the PC, the values will be displayed graphicaly and can be stored on the hard disc à¤Ã×èͧÁ×ÍÇÑ´ Moisture Meter à¤Ã×èͧÇÑ´¤ÇÒÁª×é¹ > DM4A à¤Ã×èͧÇÑ´¤ÇÒÁª×鹡ÃдÒÉ äÁé ¤Í¹¡ÃÕµ Universal Moisture Meter Type DM4A for Wood & Construction Materials, Paper & Cardboard and Others